We can accept credit / debit card payments providing you come in person and enter your pin number in our terminal. Regular account holders may pay by card over the phone.

Current Stock

IMG_0397

MF left hand side panels

MF left hand side panels,one is better than the other but both will paint up ok, 32” long at the bottom and 34.5” long at the top and 13.5” deep,, not sure what model but possibly 300 series?? £50 each no vat

IMG_0391

Ford / New Holland 40 series 4 cylinder engine side panels

Ford / New Holland 40 series 4 cylinder engine side panels, 29” long & 17” deep, only one catch between the pair. £200 the pair no vat  

IMG_9559

JCB long pallet forks

JCB long pallet forks, 1524 mm long x 125 wide x 50 deep, suit 57 mm bar like in 541 etc , new unused, 330/71445H  £600 the pair plus vat

IMG_9564

JCB loadall pick up hitch

        JCB loadall pick up hitches, good used,  

IMG_9129

Rhinos 24” digging bucket , suit 1 or 1.5 tonne machine, 25 mm pins, 100 mm boom width, 85 mm pin centres , part number IF24?

Very good bucket £90 plus vat

003f9e51-c34c-4a5a-89d2-a0bf87d1c27d

JCB 526 inner boom

JCB 526 inner boom, new unused. New style (flat front type) but should replace older rounded front type ? should be part number 332/E0647 £1500 plus VAT  

IMG_7557

JCB tool carrier headstock

    JCB tool carrier headstock to suit 530/70, 531/70, 541/70,532/60 etc, new unused  

IMG_7440

JCB loadall pick up hitch

    JCB loadall pick up hitch to suit 530/70, 531/70, 541/70, 535/95 etc. Used hitch as pictured with ram, slight bend on hook but very small. £500 plus vat

IMG_7442-300x225

JcB 4 in 1 bucket

JcB 4 in 1 bucket , new unused, 6’ wide (1850 mm) Suit 2cx and others ? Part number 141/67000 Would convert to suit many machines. £1850 plus vat

IMG_6178

JCB loading shovel tip and crowd arms

          JCB loading shovel tip and crowd arms, (2sets?) centre arm with side plates, 75 mm pin size, approx 640 mm pin centres on the centre arm end to end, 220 mm end hole to centre pin one side and 420 mm other side, The side arms are 710 pin centres…

IMG_6102

MF drawbar blade

  MF drawbar blade, 565/165 etc, thick but narrow type, 2” wide, 1,3/8” thick £100

IMG_6076

MF puh locking hooks

    MF puh locking hooks, pair in good order, later type for rod type hitches part number looks like 1661-857-M3 £30 a pair

IMG_6079

Various MF puh spares

Various MF puh spares

IMG_6082

MF rod type hitch to suit 290/590/690 etc

  MF rod type hitch to suit 290/590/690 etc, very good with very little wear, c/w hook, £500

IMG_6097

MF hitch lock plate and studs

  MF hitch lock plate and studs, £10

IMG_6099

JCB TM 320/420 boom lift ram

  JCB TM 320/420 boom lift ram, (SRS) part number 563/60200, £1200 plus vat Also boom extension ram part number 567/60247 for tm 320 / 420 £800 plus vat

IMG_6075

MF puh lift rods/arms

    MF puh lift rods/arms , 200/300/500/600 series pair L/H /R/H good order £100 the pair

IMG_4552

4” brass valve Screw type valve

  4” brass valve Screw type valve , 4” bsp female thread either side, ideal for use only umbilical systems £155.00 plus vat

IMG_5499

Ford/New Holland 40 series rear lights

  Ford/New Holland 40 series rear lights. C/w blank for switch on the side. £85 each plus vat Ref. 402913

IMG_5492

Replacement headlight to suit Ford 10 series

  Replacement headlight to suit Ford 10 series , 7910, 8210 etc Also TW series , TW 10,TW15,TW25 etc £95 plus vat each   REF44201

IMG_4995

6 stud centres to go into 32” & 34” GKN wheels

  Pair of 6 stud centres to go into 32” & 34” GKN  wheels , suit sprayer etc. £150 the pair